Buy Now, Pay Later Starting at 0% APR
JMS P2020PPS20 Plug & Play FuelMax Dual Pump Fuel Pump Booster (2020+ Shelby GT500) Hellhorse Performance®
JMS P2020PPS20 Plug & Play FuelMax Dual Pump Fuel Pump Booster (2020+ Shelby GT500) Hellhorse Performance®
JMS P2020PPS20 Plug & Play FuelMax Dual Pump Fuel Pump Booster (2020+ Shelby GT500) Hellhorse Performance®
Click to zoom in

*All images are for illustration purpose only. Actual product may vary
WARNING : Cancer and Reproductive Harm - www.P65Warnings.ca.gov.
FOR CLOSED COURSE COMPETITION USE ONLY. NOT INTENDED FOR STREET USE. THE USE, OR INSTALLATION OF THIS PRODUCT MAY ALSO BE ILLEGAL NATIONWIDE UNDER THE FEDERAL CLEAN AIR ACT (42 U.S.C. § 7522(A)(3))

JMS P2020PPS20 Plug & Play FuelMax Dual Pump Fuel Pump Booster (2020+ Shelby GT500)

$599.00
PowerMAX v2 • FuelMAX 22 Volt/44 AMP • Dual Plug & Play Voltage BoosterIncrease the output of ANY fuel pump by up to 85%!!Plug & Play for the 2020+ Shelby GT500Monitors & Enables Voltage Boosting via Accelerator Pedal Position.Easily support over 1000rwhp with the stock twin Shelby pumps!Click to watch PowerMAX make 1000+hp on a 2012 Boss Mustang!!Why replace your fuel pump when you can reliably increase it's output with PowerMAX?Use PowerMAX v2 to quickly and easily increase your stock...
$599.00

customers are viewing this product
PowerMAX v2 • FuelMAX 22 Volt/44 AMP • Dual Plug & Play Voltage Booster
Increase the output of ANY fuel pump by up to 85%!!
Plug & Play for the 2020+ Shelby GT500
Monitors & Enables Voltage Boosting via Accelerator Pedal Position.
Easily support over 1000rwhp with the stock twin Shelby pumps!
Click to watch PowerMAX make 1000+hp on a 2012 Boss Mustang!!
Why replace your fuel pump when you can reliably increase it's output with PowerMAX?
Use PowerMAX v2 to quickly and easily increase your stock fuel pumps output!
PowerMAX Version 2 upgrades include: New Case, Higher Output & More Features!!
PM-2020 boost & regulates voltage to 14.4v all of the time (Typically used on Ford/Imports)

Features:
  • Simple installation: PowerMAX plugs directly into your existing fuel pump driver(s) +12V DC feed wire.
  • Compatible with all 12V or 16V battery systems
  • Works on all 2020+ Shelby GT500's.
  • Designed to be enabled via the Accelerator Pedal Position Sensor (Plug & Play)
  • Adjustable Voltage Ramp In / Ramp Out • Choose a Time Ramp or from a monitored 0-5v sensor: Eliminate fuel pressure spikes!!
  • Green Status LED: Know at a glance what the unit is doing. Blinking LED = Boosting Voltage
  • Optional Remote Voltage Control Knob: Over-Ride the voltage output when the knob is connected (PM-2999)
  • Enable Voltage Boosting with Ground or via a monitored 0-5v external sensor.
  • Each PowerMAX v2 Kit Contains: 44 Amp PowerMAX V2 Voltage Booster, Dual Plug & Play Wiring Harness, Pedal Harness, Installation Kit, Set of Instructions

Installation Kit Contains: 1 - Hobbs Switch Preset @ 5psi (user adjustable 3-7psi), 1 - Fitting 1/8npt Female to 3/16" Male Barb, 1 - Vacuum Tee 3/16" x 3/16" x 3/16", 1 - Vacuum Tee 1/4" x 1/4" x 3/16", 1 - Vacuum Tee 3/8" x 3/8" x 3/16", 1 Foot of 5/32" vacuum hose, 2 - 30amp mini-fuse, solder, 2 - 10/12gauge Heat Shrink Butt Splices, 2 - #8 stud 18/22 gauge wire Heat Shrink Ring Terminal, 1 - 10 gauge Heat Shrink Ring Terminal, 6- Zip Ties, 6 - Self drilling hex screws, mini screw-driver
Read More
Read Less
The cookie settings on this website are set to 'allow all cookies' to give you the very best experience. Please click Accept Cookies to continue to use the site.

Your cart

×