Buy Now, Pay Later Starting at 0% APR
Driveshaft Shop Aluminum One Piece Driveshaft - Manual 900HP (15-17 GT) Driveshaft Shop
Driveshaft Shop Aluminum One Piece Driveshaft - Manual 900HP (15-17 GT) Driveshaft Shop
Driveshaft Shop Aluminum One Piece Driveshaft - Manual 900HP (15-17 GT) Driveshaft Shop
Click to zoom in

*All images are for illustration purpose only. Actual product may vary
WARNING : Cancer and Reproductive Harm - www.P65Warnings.ca.gov.
FOR CLOSED COURSE COMPETITION USE ONLY. NOT INTENDED FOR STREET USE. THE USE, OR INSTALLATION OF THIS PRODUCT MAY ALSO BE ILLEGAL NATIONWIDE UNDER THE FEDERAL CLEAN AIR ACT (42 U.S.C. § 7522(A)(3))

Driveshaft Shop Aluminum One Piece Driveshaft - Manual 900HP (15-17 GT)

$997.71
Reduces Rotating Mass for Quicker ET's Lighter and Stronger Than Stock 6061-T6 Aluminum Construction - Rated for 3450ft lbs of Torque One Piece Driveshaft Design 4" Diameter for Extra Clearance High Speed Balanced - Rated Up to 900 Horsepower Fits 2015-2017 GT Mustangs Equipped with a Manual Transmission Light Weight. Lighter and stronger than the stock 2-piece driveshaft, The Driveshaft Shop's One Piece Aluminum Mustang Driveshaft greatly reduces rotating mass to improve your Pony's 1/4 mile track times. Superior Quality....
$997.71

customers are viewing this product
  • Reduces Rotating Mass for Quicker ET's
  • Lighter and Stronger Than Stock
  • 6061-T6 Aluminum Construction - Rated for 3450ft lbs of Torque
  • One Piece Driveshaft Design
  • 4" Diameter for Extra Clearance
  • High Speed Balanced - Rated Up to 900 Horsepower
  • Fits 2015-2017 GT Mustangs Equipped with a Manual Transmission

Light Weight. Lighter and stronger than the stock 2-piece driveshaft, The Driveshaft Shop's One Piece Aluminum Mustang Driveshaft greatly reduces rotating mass to improve your Pony's 1/4 mile track times.

Superior Quality. Constructed from 4" diameter 6061-T6 aluminum tubing that is rated for 3450ft lbs of torque, this driveshaft features a solid 1350 front Spicer u-joint with flange and adapter plate to mount directly to the transmission and a 108mm 6-bolt rear CV joint made from an all new 300M material. 


High Speed Balanced. Balanced on one of the most sophisticated balancing machines in the industry, at up to 9500RPM (revolutions per minute) this one piece driveshaft is rated for use up to 900 horsepower.

 

So the 2015 Mustang now has an independent rear suspension (IRS) and the driveshaft is a little different than the S197 cars. Although the factory one is still a 2 piece shaft, they are different in configuration. Automatic uses a 4-bolt flange on the back of the trans (DSS will be using the new Forged Aluminum 1350 flange for this) but the Manual's (all of them) have a Guibo. What is a Guibo? its a rubber doughnut coupler like ones used in most European cars. They're put on to make the drivetrain smoother and more soft. But lets face it, soft in a performance car is well, kinda soft.

What we have done is make a billet plate to eliminate the Guibo, then changed that end to a nice 1350 solid Spicer u-joint. The end is pulse welded to the tube on the aluminum shaft and then a 6-bolt CV just like the factory one. Why does DSS use the CV and not a slider like from a 4x4? The reason is that DSS high-speed balances their driveshafts and found out years ago that the CV is more stable and less likely to have Harmonic issues. Also the CV will have a much higher critical speed then a male/female slider.

We here at DSS have become a leading force in using CV's on Driveshafts in the aftermarket and have come a long way with how they are made and used. What's great about this car being IRS is that there are no issues with angles, adjustable arms or ride height issues that can affect the drivetrain. 

Read More
Read Less
The cookie settings on this website are set to 'allow all cookies' to give you the very best experience. Please click Accept Cookies to continue to use the site.

Your cart

×