Click to zoom in
*All images are for illustration purpose only. Actual product may vary
WARNING : Cancer and Reproductive Harm - www.P65Warnings.ca.gov.
FOR CLOSED COURSE COMPETITION USE ONLY. NOT INTENDED FOR STREET USE. THE USE, OR INSTALLATION OF THIS PRODUCT MAY ALSO BE ILLEGAL NATIONWIDE UNDER THE FEDERAL CLEAN AIR ACT (42 U.S.C. § 7522(A)(3))
Whipple Supercharger WK-2621-G5 2015+ Shelby GT350 Gen 5 W185RF 3.0L Supercharger Complete Kit / Intercooled / 10-11psi / Black
Whipple continues to stay at the forefront of not only supercharger technology but also automotive technology. When the 2018 Mustang GT specs came out, it flipped their world upside down, quite literally. They created an entirely new supercharger that was upside-down—sort of. We mean upside down in that, opposite of the previous 2017-older Mustang 2.9L superchargers, the intercooler now sat ON TOP of the rotors. This new 3.0L supercharger has dubbed the Gen 5. Why not Gen 1 since it’s...
customers are viewing this product
Whipple continues to stay at the forefront of not only supercharger technology but also automotive technology. When the 2018 Mustang GT specs came out, it flipped their world upside down, quite literally. They created an entirely new supercharger that was upside-down—sort of. We mean upside down in that, opposite of the previous 2017-older Mustang 2.9L superchargers, the intercooler now sat ON TOP of the rotors. This new 3.0L supercharger has dubbed the Gen 5. Why not Gen 1 since it’s an all-new design, you ask??
When the Gen 5 3.0L was released, the 2.9L for the 2015-2017 S550 Mustangs was on Gen 3, proving to be a worthy upgrade from the Gen 1 and Gen 2 setups. On top of that, Whipple already had the Gen 4 rotors in the works, but they knew that they would be retro-fitting the new 3.0L for 2018 onto the older cars since it was proving to be incredibly efficient and make some insane horsepower, hence the Gen 5 name.
Well, the time is NOW. Whipple Superchargers brings you the Gen 5 3.0L supercharger for your 2015-2017 Mustang GT! Featuring the same technology as used in the kits for the 2018+ Mustang, this kit will be sure to make some extraordinary power and as available in different stages to suit your needs. Add some boost to your S550 with the latest & greatest from Whipple Superchargers.
What’s new about the Gen 5 besides the intercooler and rotors switching locations? It has all new bearings, gears, rotors and housing that allow the new supercharger to spin faster, longer and safer while producing more power than any other positive displacement supercharger ever built.
The Gen 5 3.0L also features an even larger intercooler than the already massive Whipple Cooler that cooled the Ford Cobra Jets and all the record setting S550 Mustangs. Couple this with the industry's leading heat exchanger, water reservoir and intercooler pump, you get more power with lower boost levels and quicker recovery times after the aggressive operation.
With years of OEM and racing experience, Whipple engineers have developed a unique PCM calibration that reconfigures all the necessary engine functions including fuel, spark, knock detection, torque management, transmission control and electronic throttle control. The vehicles PCM continuously monitors the engines torque output while monitoring many different parameters to keep the engine in its ideal parameters. If a parameter falls below specification, the PCM will lower boost and torque output until the problem can be cured. No other calibration in the field has such technology, giving the Whipple SC system unheralded performance and reliability. Each Whipple kit comes with unique software and an OBDII flash tool giving the customer the ability to flash/update whenever needed. Each customer also gets the new Flight Control Software, adjusts wheel/axle size, octane adjustment, crank/cam relearn and many other unique features.
Each complete Whipple system comes with the IAT2 harness and sensor to properly monitor the delta between the incoming air and the compressed air after the intercoolers. This helps maximise power in all given environments. The 6-rib billet idler system features a spring-loaded billet tensioner, billet idler pulleys and lightweight pocketed supercharger pulley. The 6-rib can easily be upgraded to a 10-rib with the optional 10-rib system. Each system comes with an adjustable idler pulley to allow variance in SC pulleys with minimal belt length changes. The massive 150mm Roval inlet allows for nearly any throttle body to be run, 80mm stock, 132mm or 150mm throttle bodies.
Leaving no stone unturned, Whipple's revolutionary system for the Ford 5.0L Coyote engines is truly resetting the standards of supercharging. With its massive front feed inlet, typical inlet inefficiencies are a thing of the past. Featuring the all-new groundbreaking, Gen 5 inverted supercharger with the patent-pending triple intercooler technology.
Other positive displacement superchargers sacrificed plenum volume and runner size. At the same time, Whipple engineers used every square inch available to open the manifold volume, allowing for future expansion of power levels. Small runner and small volume manifolds cause excess boost "build-up" giving you manifold pressure, not proper cylinder pressure. This results in high boost, low power scenario's with excess heat from the lack of sound flowing air volume.
Whipple didn't just stop there. Knowing that the Coyote motors love boost, Whipple’s team squeezed in not one, but three high-density intercooler cores featuring variable thickness to maximise airflow and cooling capacity. The triple coolers allow for maximum surface area to promote the equal distribution and increased cooling. Cooler air equals denser air which equals more power at each boost level while being safer on engine components.
The bigger intercooler alone wasn’t enough, in previous generations, the supercharger discharge was typically too far forward from the intercooler core, and sandwiched so close to the core on top that the core’s surface area was not properly utilised. With the new 3.0L Gen 5, Whipple increased the volume and distance above the intercooler core and do the same below. Like some of our competition, this issue raises the “boost” in the manifold, but not at the valves and combustion chamber. This means high boost, low power and high discharge temps. Whipple’s front feed system has a rear discharge port at nearly the centre of the IC core. Whipple’s design utilises almost the entire intercooler core through countless CFD analysis, resulting in less pressure drop and cooler temps for increased power levels.
Another great feature to the Whipple Coyote kits is the oversized heat exchanger, nearly 150% more volume than the competition, giant aluminium intercooler reservoir and optional dual fan kit. The oversized heat exchanger is almost the engine radiator's size, giving incredible cooling capacity for daily driving, drag racing or road racing. Get the dual Spal fan kit option and increase the airflow over the heat exchanger. The Whipple large aluminium reservoir is again a unique feature included with every kit. The aluminium reservoir is remotely mounted in the driver side inner fender, keeping it in the cool area away from engine heat, along with having over 1.2 gallons of capacity in the reservoir alone! Giving the intercooler system well over 2 gallons of capacity. This means cooler air temps, less heat soak and more power!
When the Gen 5 3.0L was released, the 2.9L for the 2015-2017 S550 Mustangs was on Gen 3, proving to be a worthy upgrade from the Gen 1 and Gen 2 setups. On top of that, Whipple already had the Gen 4 rotors in the works, but they knew that they would be retro-fitting the new 3.0L for 2018 onto the older cars since it was proving to be incredibly efficient and make some insane horsepower, hence the Gen 5 name.
Well, the time is NOW. Whipple Superchargers brings you the Gen 5 3.0L supercharger for your 2015-2017 Mustang GT! Featuring the same technology as used in the kits for the 2018+ Mustang, this kit will be sure to make some extraordinary power and as available in different stages to suit your needs. Add some boost to your S550 with the latest & greatest from Whipple Superchargers.
What’s new about the Gen 5 besides the intercooler and rotors switching locations? It has all new bearings, gears, rotors and housing that allow the new supercharger to spin faster, longer and safer while producing more power than any other positive displacement supercharger ever built.
The Gen 5 3.0L also features an even larger intercooler than the already massive Whipple Cooler that cooled the Ford Cobra Jets and all the record setting S550 Mustangs. Couple this with the industry's leading heat exchanger, water reservoir and intercooler pump, you get more power with lower boost levels and quicker recovery times after the aggressive operation.
With years of OEM and racing experience, Whipple engineers have developed a unique PCM calibration that reconfigures all the necessary engine functions including fuel, spark, knock detection, torque management, transmission control and electronic throttle control. The vehicles PCM continuously monitors the engines torque output while monitoring many different parameters to keep the engine in its ideal parameters. If a parameter falls below specification, the PCM will lower boost and torque output until the problem can be cured. No other calibration in the field has such technology, giving the Whipple SC system unheralded performance and reliability. Each Whipple kit comes with unique software and an OBDII flash tool giving the customer the ability to flash/update whenever needed. Each customer also gets the new Flight Control Software, adjusts wheel/axle size, octane adjustment, crank/cam relearn and many other unique features.
Each complete Whipple system comes with the IAT2 harness and sensor to properly monitor the delta between the incoming air and the compressed air after the intercoolers. This helps maximise power in all given environments. The 6-rib billet idler system features a spring-loaded billet tensioner, billet idler pulleys and lightweight pocketed supercharger pulley. The 6-rib can easily be upgraded to a 10-rib with the optional 10-rib system. Each system comes with an adjustable idler pulley to allow variance in SC pulleys with minimal belt length changes. The massive 150mm Roval inlet allows for nearly any throttle body to be run, 80mm stock, 132mm or 150mm throttle bodies.
Leaving no stone unturned, Whipple's revolutionary system for the Ford 5.0L Coyote engines is truly resetting the standards of supercharging. With its massive front feed inlet, typical inlet inefficiencies are a thing of the past. Featuring the all-new groundbreaking, Gen 5 inverted supercharger with the patent-pending triple intercooler technology.
Other positive displacement superchargers sacrificed plenum volume and runner size. At the same time, Whipple engineers used every square inch available to open the manifold volume, allowing for future expansion of power levels. Small runner and small volume manifolds cause excess boost "build-up" giving you manifold pressure, not proper cylinder pressure. This results in high boost, low power scenario's with excess heat from the lack of sound flowing air volume.
Whipple didn't just stop there. Knowing that the Coyote motors love boost, Whipple’s team squeezed in not one, but three high-density intercooler cores featuring variable thickness to maximise airflow and cooling capacity. The triple coolers allow for maximum surface area to promote the equal distribution and increased cooling. Cooler air equals denser air which equals more power at each boost level while being safer on engine components.
The bigger intercooler alone wasn’t enough, in previous generations, the supercharger discharge was typically too far forward from the intercooler core, and sandwiched so close to the core on top that the core’s surface area was not properly utilised. With the new 3.0L Gen 5, Whipple increased the volume and distance above the intercooler core and do the same below. Like some of our competition, this issue raises the “boost” in the manifold, but not at the valves and combustion chamber. This means high boost, low power and high discharge temps. Whipple’s front feed system has a rear discharge port at nearly the centre of the IC core. Whipple’s design utilises almost the entire intercooler core through countless CFD analysis, resulting in less pressure drop and cooler temps for increased power levels.
Another great feature to the Whipple Coyote kits is the oversized heat exchanger, nearly 150% more volume than the competition, giant aluminium intercooler reservoir and optional dual fan kit. The oversized heat exchanger is almost the engine radiator's size, giving incredible cooling capacity for daily driving, drag racing or road racing. Get the dual Spal fan kit option and increase the airflow over the heat exchanger. The Whipple large aluminium reservoir is again a unique feature included with every kit. The aluminium reservoir is remotely mounted in the driver side inner fender, keeping it in the cool area away from engine heat, along with having over 1.2 gallons of capacity in the reservoir alone! Giving the intercooler system well over 2 gallons of capacity. This means cooler air temps, less heat soak and more power!
- Most extensive intercooler system on the market, featuring triple core technology
- No other upgrades required, just massive power right out of the box
- Front entry Gen 5 W185ax (3.0 litres/3000cc) Whipple twin-screw supercharger that significantly outperforms competitions 2.3L and 2.65L roots-type systems
- Gen 5 supercharger features new 3x4 rotor combination for increased RPM capacity, large diameter for increased airflow and small leak path, increased helix for optimal sealing.
- 3.0L is 13% larger than 2.65L roots-type allowing lower power draw and lower discharge temps to flow the same amount of air (more power to the rear wheels)
- Oversized Crusher™ 150mm inlet for maximum airflow capacity and minimal rotor cavitation
- The inverted design allows for oversized intercooler core compared to other smaller intercooler cores giving Whipple lower air charge temps which allows more boost and timing to be run on pump gas
- Patent-pending triple intercooler technology with massive 1" port capacity
- Massive air-to-water aluminium bar-plate intercoolers (over 55% larger than some competition) offer more cooling than any other positive displacement system available. Nothing comes close
- Massive oversized aluminium intercooler reservoir (over 2 gallons) holds more than double any competitors IC water system allowing longer more consistent power levels vs competition
- High flow intercooler pump, nearly double the flow of the standard units others use
- Whipple Superchargers massive oversized intercooler air-bypass system for the industry-leading reduction of burst knock and incredible fuel economy
- Included OBDII flash tool, new Tomahawk flash tool with the new Flight Control technology
- Tomahawk allows wheel/tire axle changes (a Whipple exclusive)
- Exclusive 3x4 rotor combo for a significant increase in airflow under the curve than less efficient 4x4 roots
- Center discharge port for better cylinder to cylinder distribution then other twin-screws with cobbled together billet adapters and forward facing discharge
- Extra plenum volume below intercooler core for far less pressure drop and better use of the increased surface area of the massive intercooler core
- More boost at the "hit" than any other twin-screw
- Flat torque curve for incredible acceleration
- Oversized heat exchanger for unexpected intercooler water temps, 150% more volume than competition, standard with every kit
- Fits under factory hood with no modifications
- No cutting or grinding on the engine block
- No cutting or grinding the K-brace
- No internal modifications required
- Kits come complete with all necessary parts and hardware for installation
- Plug and play wiring with male and female connections
- Proven 6-rib belt system with heavy-duty spring loaded tensioner and adjustable idler system
- Optional 10-rib belt system with matching 6061 T6 billet pulleys
- OEM quick connect fittings for easy installation
- Complete kits and competition kits are available
- Available in wrinkle black, polish, Ford textured blue or any custom colour
- Easily upgradeable with more significant throttle body (132mm or 150mm Roval elliptical), dual electric Spal 11" high-speed fans, optional supercharger pulleys
- Instant boost at the touch of the throttle
- 3-minute pulley changes
- Easy belt changes
- Lightweight pocketed 6061 T6 billet aluminium SC pulley
- Optional three years, 36,000-mile engine warranty
- Denso ITV-24 spark plugs included
- 72lb DW Fuel Injectors Included
- 132mm Billet Throttle Body
Read More