Buy Now, Pay Later Starting at 0% APR
Whipple Superchargers WCA-S550BIGAIR Cobra Jet 150mm Cold Air Intake System (2015-2020 Mustang GT Gen 5 Whipple w/150mm Throttle Body) - WK-WCA-S550BIGAIR Hellhorse Performance®
Whipple Superchargers WCA-S550BIGAIR Cobra Jet 150mm Cold Air Intake System (2015-2020 Mustang GT Gen 5 Whipple w/150mm Throttle Body) - WK-WCA-S550BIGAIR Hellhorse Performance®
Whipple Superchargers WCA-S550BIGAIR Cobra Jet 150mm Cold Air Intake System (2015-2020 Mustang GT Gen 5 Whipple w/150mm Throttle Body) - WK-WCA-S550BIGAIR Hellhorse Performance®
Whipple Superchargers WCA-S550BIGAIR Cobra Jet 150mm Cold Air Intake System (2015-2020 Mustang GT Gen 5 Whipple w/150mm Throttle Body) - WK-WCA-S550BIGAIR Hellhorse Performance®
Click to zoom in

*All images are for illustration purpose only. Actual product may vary
WARNING : Cancer and Reproductive Harm - www.P65Warnings.ca.gov.
FOR CLOSED COURSE COMPETITION USE ONLY. NOT INTENDED FOR STREET USE. THE USE, OR INSTALLATION OF THIS PRODUCT MAY ALSO BE ILLEGAL NATIONWIDE UNDER THE FEDERAL CLEAN AIR ACT (42 U.S.C. § 7522(A)(3))

Whipple Superchargers WCA-S550BIGAIR Cobra Jet 150mm Cold Air Intake System (2015-2020 Mustang GT Gen 5 Whipple w/150mm Throttle Body) - WK-WCA-S550BIGAIR

$500.00
The wait is over!! The all-new 150mm Cobra Jet Cold Air Intake system for the 2015-2019 Mustang GT's using the Gen 5 Whipple Supercharger is now available. This system comes complete with the air intake tube, 150mm MAF housing, High Flow air filter, and all necessary clamps and couplers.The Cobra Jet 150mm Intake System from Whipple is designed to work with the Whipple 150mm throttle body and does require some modification to fit properly on non-Cobra Jet cars. Specifically, the...
$500.00

customers are viewing this product

The wait is over!! The all-new 150mm Cobra Jet Cold Air Intake system for the 2015-2019 Mustang GT's using the Gen 5 Whipple Supercharger is now available. This system comes complete with the air intake tube, 150mm MAF housing, High Flow air filter, and all necessary clamps and couplers.

The Cobra Jet 150mm Intake System from Whipple is designed to work with the Whipple 150mm throttle body and does require some modification to fit properly on non-Cobra Jet cars. Specifically, the tube slightly interferes with the vehicle's horns and intercooler hoses. For those using aftermarket trunk-mount ice tanks intercooler hose interference isn't as much of an issue as if you use this intake with the standard Whipple intercooler hose setup.

This system was designed to flow as much air as possible and prevent any type of inlet restriction.

150mm Intake Features

  • 150mm Cold Air Intake Tube
  • 150mm MAF Housing
  • High Flow Air Filter
  • Includes Couplers and Hose Clamps Needed for Installation


NOTES:
Will work with Gen 3-5 Whipple 132mm and 150mm Throttle Bodies
Slight clearance issues with the horns of the vehicles and standard Whipple Intercooler Hose Routing

Read More
Read Less
The cookie settings on this website are set to 'allow all cookies' to give you the very best experience. Please click Accept Cookies to continue to use the site.

Your cart

×